Checking Sensor Controller Information; Setting Key Lock; Setting The Sensor Load Method - Omron ZS-L User Manual

Section 3
Setting the System Environment

Checking Sensor Controller information

Displays the measurement cycle and version of Sensor Controller system.
FUN Mode-[SYSTEM]-[INFO]
Setting
CYCLE
INFO

Setting key lock

The key lock function disables all Sensor Controller keys. Once the keys have been
disabled, no key input will be accepted until the lock is released.This function is useful to
prevent inadvertent changes to settings.
Moving to the key lock menu or moving between menu hierarchies by the MENU or ESC
keys are possible even when the key lock function is ON.
FUN Mode-[SYSTEM]-[KEYLOCK]
Setting
OFF
ON

Setting the sensor load method

Set whether or not to load information from the currently connected Sensor Head when the
Sensor Controller is started up.
FUN Mode-[SYSTEM]-[Sen INFO]
Setting
LOAD
SAVE
ZS-L
3-36
User's Manual
Displays the current measurement cycle.
Displays the version of the Sensor Controller system.
Cancels the key lock function. (default value)
Turns the key lock function ON.
Reads the data currently saved on the Sensor Head each time that the Sensor
Controller is started up. (default value)
Data is not read from the Sensor Head when the Sensor Controller is started
up if the same Sensor Head at the previous startup is connected.
When the combination of Sensor Controller and Sensor Head is fixed,
selecting "SAVE" sometimes results in the Sensor Controller starting
up more stably depending on the operating environment.
Description
Description
Description