Setting Measurement Items; Shape Inspection; Pattern Search - Omron ZFX-C10 User Manual

Setting Measurement Items

Shape Inspection

Pattern Search

Register an image pattern in beforehand as a model, and search for parts that most resemble an already
registered model. The correlation indicating how much parts resemble each other, the position of the
measurement target, and their angle can be output. Use this function to check for whether different-type
products are mixed in, or to calculate the position of the measurement target.
Setup
Region settings
This function sets the region to be registered as the model and the region to search for the model.
MENU mode - [Setup] - [Item] - [Region]
Item
Register model
Reference model
Search region
Reference point
46

Setting Measurement Items

Search region (region
for searching model)
Reference point
Model
(image pattern to find)
Description
This function registers the image pattern to find as the model.
Setting the Region p.178
The image that is registered as the model can be referenced.
Set the region in which to search for the model.
Set the coordinates of which part of the model are to be output. The default is the center
position of the model.
Measurement
Parts resembling the model are searched for.
ZFX-C User's Manual