Tools; Saving/Loading Data - Omron ZFX-C10 User Manual

Tools

Saving/Loading Data

You can back up setup data and measured image data on SD cards. Alternatively, these backed up data can
be loaded to the Controller.
Data that can be saved/loaded
• System data: Setup data under [System]
• Bank data/bank group data: Setup data under [Setup]
• Image data: Measurement image data saved internally on the Controller
(proprietary format: color images *.BYR, black-and-white images *.GRY)
Important
During execution of a save or a load, do not input the RESET signal or turn the power OFF. Doing so might damage
the data, or prevent the Controller from functioning normally when it is next started up.
MENU mode - [Tool] - [Backup]
Setup Item
Image data
Bank data
Bank group data
System data
Note
Configuration of directory/files on SD Card
SD Card
Bank data
[BANK]
***.BNK
Bank group data
[BANKGRP]
***.BNG
Image data
[IMAGE]
***.BYR
System data
[SYSTEM]
***.SYS
124

Tools

Description
Select the target data to perform save/load on.
Save: Saves the target data on the Controller to SD card.
Load: Loads target data saved on SD card to the Controller.
Directory for storing bank data
(Any file name within 8 characters)
Directory for storing bank group data
(Any file name within 8 characters)
Directory for storing measurement image
File name differs according to the save method.
• All Stored Image: IMAGE***.BYR (*** is a running number starting from 000.)
• Individual save: Any file name
The file extension differs according to the file type, color or black-and-white.
• Color image: .BYR
• Black-and-white image: .GRY
Directory for storing system data
(Any file name within 8 characters)
ZFX-C User's Manual