Omron ZFX-C10 User Manual page 28

Installing on the DIN Track
Removing procedure
2
26
Mounting and Connecting Devices
1
Hook the Controller's upper hook onto the DIN track.
2
1
Push the Controller down onto the DIN track until its
lower hook is snapped into place.
2
Important
1
Pull the Controller's lower hook downwards.
2
Lift up the Controller from its bottom to remove it from
the DIN track.
1
•Attach the End Plate (sold separately) to both sides of the
Controller on the DIN track.
•Attach the Exhaust Unit (supplied) to the Controller when
installing other devices adjacently on the same DIN track
as the Controller.
OMRON
OUTPUT RUN ERROR ENABLE
ZFX-C10
MENU
AUTO
1 2 3 4
DIN track (sold separately)
PFP-100N (1 m)
PFP-50N (0.5 m)
PFP-100N2 (1 m)
p.20
End Plate (sold separately)
PFP-M
USB
Exhaust Unit
SD
CARD
ADJ
RUN
ESC
SET
PULL OPEN
ZFX-C User's Manual