Omron ZFX-C10 User Manual page 181

The shapes that can be selected differ according to the measurement item. Only selectable shapes are
displayed.
Shape How to draw this shape
Box
The entire shape moves.
Circle
The entire shape moves. The diameter is changed.
Ellipse
The entire shape moves. The bottom right coordinates move.
Polygon
Specification
of 1st point
Circum
The entire
shape moves.
Arc
The entire
shape moves.
Box
The entire
(diagonal
shape moves.
development)
ZFX-C User's Manual
The bottom right coordinates move.
The shape The new size
is resized. is applied.
The region
is moved.
The shape
The new size
is resized.
is applied.
The region
is moved.
The shape
is resized.
The new size
is applied.
The region
is moved.
Specification of
2nd point
SET key Specification of
3rd point
Return Return
The diameter is
changed.
The shape The width
is resized. is changed.
Return Return
The end point
moves.
The end point The center
moves. point moves.
Return Return
The end point
moves.
The width is
The end point
changed.
moves.
Return Return
Applying the shape
Applying the shape
Applying the shape
Specification of Applying the
3rd point onwards shape
The new size
is applied.
The width is changed.
The new size
is applied.
Applying the
shape
The center The width is
moves. changed.
The width
is changed.
Return
The width is The shape
changed. moves.
Basic Knowledge for Operation
The shape moves
(only when it is
corrected).
The new size is
applied.
Applying
the shape
The new size is
applied.
Applying the
shape
179