Omron ZFX-C10 User Manual page 31

Connecting the Camera to the Controller
To extend the installation distance between cameras and the Controller, see p.15
Disconnection procedure
Loosen the fastening screws (two locations) to unlock the camera's cable, and then pull the camera's cable
connector straight out.
Important
• Be sure to hold the connector of the camera to disconnect it. Failure to do so may damage the camera's cable.
• Do not touch the terminals inside the connector.
ZFX-C User's Manual
1
Insert the camera's connector into the Controller's
Camera connector.
2
Tighten the two fastening screws of the Controller's
Camera connector.
Tightening torque: 0.15 N•m.
Important
•Do not touch the terminals inside the connector.
•Fasten the connector while making sure that it is not subjected
to vibration or shock.
•Do not mount the Controller in such a way that a load is steadily
applied on the connector, for example, with tension applied to
the cables.
Mounting and Connecting Devices
29