Communications Setting Level; Communications Data Length (Len); Communications Stop Bit (Sbit); Communications Parity (Prty) - Omron E5ZN Operation Manual

Communications Setting Level

7-7 Communications Setting Level
7-7-1

Communications Data Length (len)

Function
Communications
Settings
7-7-2

Communications Stop Bit (sbit)

Function
Communications
Settings
7-7-3

Communications Parity (prty)

Function
Communications
Settings
166
Setting changes to "communications data length" must be enabled by execut-
ing a software reset or by turning ON the power again.
ch
Shared C3
Setting range
00000007H to 00000008H (7 or 8)
Setting changes to "communications stop bit" must be enabled by executing a
software reset or by turning ON the power again.
ch
Shared C3
Setting range
00000001H to 00000002H (1 or 2)
Setting changes to "communications parity" must be enabled by executing a
software reset or by turning ON the power again.
ch
Shared C3
Setting range
00000000H to 00000002H
00000000H (0): None (none)
00000001H (1): Even (eUen)
00000002H (2): Odd (odd)
Variable type
0013 or 0113
Variable type
0014 or 0114
Variable type
0015 or 0115
Section 7-7
Address
Unit Default
Bit 7
Address
Unit Default
Bit 2
Address
Unit Default
- 1: Even