Sensor Error Indicator Used (Sedu) - Omron E5ZN Operation Manual

Initial Setting Level

7-5-18 Sensor Error Indicator Used (sedu)

Function
Communications
Settings
Condition:
Upgraded pulse output models and analog output models only
• This parameter sets whether the error indicator (ERROR) on the front
panel of the E5ZN will light or not light when a sensor error is detected.
• For the initial setting, when an input channel sensor is not connected dur-
ing operation, a sensor error is detected and the ERROR indicator will
light. The parameter can be set to always not light, so that the ERROR
indicator will not light when a sensor error is detected.
• This parameter is supported by upgraded pulse output models and ana-
log output models only.
ch Variable type
Shared C3
Setting range
00000000H(0): Indicator always not lit.
00000001H(1): Sensor error indicator lit (ch1 only)
00000002H(2): Sensor error indicator lit (ch2 only)
00000003H(3): Sensor error indicator lit (ch1 or ch2)
Section 7-5
Address
003B or 013B
Default
3: Sensor error indicator lit
(ch1 or ch2)
153