Omron E5ZN Operation Manual page 25

Installation
Mounting the E5ZN
Module
Mounting Bracket
Mount the E5ZN Temperature Controller to DIN track. Use screws to attach
the DIN track to the control panel in at least three places.
• PFP-50N (50 cm)/PFP-100N (100 cm) DIN Track
Vertical: OK
Position the DIN track vertical to the ground.
Mounting the Module
Line up the Module with the guides on the Terminal Unit and push firmly into
place.
Removing the Module
Section 2-1
Horizontal: NG
Line up with guides and push firmly until
the Module clicks into place.
Push the hooks on both ends of the
Module and pull out the Module to
remove it.
11