Omron E5ZN Operation Manual page 14

Application Precautions
xvi
• Places subject to vibration and large shocks
• Places subject to splashing liquid or oily atmosphere
• Places directly subject to heat radiated from heating equipment
• Places subject to intense temperature changes
• Cleaning: Do not use paint thinner or the equivalent. Use standard grade
alcohol to clean the Temperature Controller.
• Install DIN track vertically.
• When mounting the Terminal Unit to the Temperature Controller, make
sure that the hooks on the Temperature Controller are inserted properly
into the Terminal Unit.
• Remove the dust sticker from the Temperature Controller after completing
wiring to enable heat radiation.
• When you draw out the internal mechanism from the housing, never
touch electric components inside or subject the internal mechanism to
shock.
3