Operation Level; Pv/Sp - Omron E5ZN Operation Manual

Operation Level

7-3 Operation Level
7-3-1 PV
Function
Communications
Monitoring
See Also
7-3-2

PV/SP

Function
Communications
See Also
Condition: The "additional PV display" parameter must be set to ON.
The PV is displayed on the No.1 display, and nothing is displayed (blank) on
the No. 2 display.
ch
1 C0
2 C0
PV Input range lower limit 10% FS to input range upper limit
+10%FS
Scaling lower limit 10% FS to scaling upper limit +10%FS
The decimal point position is dependent on the selected sensor.
• Related Parameters
"Input type" (page 143)
"SP upper limit" "SP lower limit" (page 145)
The PV is displayed on the No.1 display, and the SP is displayed on the No. 2
display.
PV Input range lower limit 10%FS to input range upper limit
+10%FS
Scaling lower limit 10%FS to scaling upper limit +10%FS
SP SP lower limit to SP upper limit
Monitor value/parameter
PV
SP
Refer to the PV parameter.
Variable type
0000
0100
Monitoring range
Monitoring range
Monitoring range
ch Variable type
1 C0
2 C0
1 C1
2 C1
Section 7-3
Address
Unit
EU
Unit
EU
Unit
EU
Address
0000
0100
0003
0103
129