Read Controller Attribute - Omron E5ZN Operation Manual

Commands and Responses
Response

5-9-20 Read Controller Attribute

Command
Response
MRC SRC Response code
"30" "05" "0000"
Response code: The code shown above represents normal completion. For
details on the response code, refer to 5-7 Operation Commands .
MRC SRC
"05" "03"
This command reads the model name and communication buffer size of the
Temperature Controller.
The command can be used regardless of what state the Temperature Control-
ler is in.
MRC SRC Response code
"05" "03" "0000"
Model name No. of
control
points
E5ZN-2QNH0 2
E5ZN-2QPH0 2
E5ZN-2TNH0 2
E5ZN-2TPH0 2
E5ZN-2CNF0 2
E5ZN-2CPF0 2
The model name is expressed in 10-byte ASCII.
A fixed value of "0048H" (72 bytes) for the buffer size is returned.
Response Code
Response Error name
code
"1001" Command length over
"2203" Operation error
"0000" Normal completion
Model name
Control Auxiliary
output output 1, 2
Pulse volt- Transistor out-
age out- put (sinking)
put
Pulse volt- Transistor out-
age out- put (sourcing)
put
Transistor Transistor out-
output put (sinking)
Transistor Transistor out-
output put (sourcing)
Linear Transistor out-
current put (sinking)
output
Linear Transistor out-
voltage put (sourcing)
output
The command is too long.
An error occurs in EEPROM.
The command is successfully executed.
Section 5-9
Buffer size
"0048"
Auxiliary Heater
output 3, 4 burnout
alarm
Supported
Supported
Supported
Supported
Linear volt- Not sup-
age output ported
Linear volt- Not sup-
age output ported
Description
87