Table of Contents
Advertisement
Quick Links
Multipoint Temperature Controller
E5ZE-8@D1@B-V2
Multipoint Temperature Controller Connects
to the Programmable Controller with Ease
• Conforms to DeviceNet requirements with remote I/O and FINS
message communications, thus connecting to a CompoBus/D
Master without programs for remote I/O communications and to
OMRON's Programmable Controller with ease for explicit mes-
sage communications.
• High-speed input sampling of only 0.2 s at the maximum of eight
temperature inputs.
Model Number Structure
Model Number Legend
E5ZE-8@@@D1@B-V2
1 2 3 4 5
6 7 8
1. Number of Control Points
8: 8 channels
2. Control Method
A: Standard (heating or cooling)
V: Heating and cooling
3. Control Output (Heating Side)
Q: Voltage output (for driving SSR)
C: Current output
4. Heater Burnout and SSR Failure Detection (See note 1.)
H: Available
A: Not available
Note: 1. Heater burnout and SSR failure detection are not available when the control output on the heating side is current output.
2. Refer to the List of Models for combinations of functions.
5. Communications Function
D1: DeviceNet
6. Input
TC: Thermocouple
P: Platinum resistance thermometer
7. Case
B: Provided (Models with case)
8. Version
V2: Supports explicit messages
Multipoint Temperature Controller
E5ZE-8@D1@B-V2
1
Advertisement
Table of Contents
Related Manuals for Omron E5ZE-8 D1 B-V2
Summary of Contents for Omron E5ZE-8 D1 B-V2
- Page 1 V2: Supports explicit messages H: Available A: Not available Note: 1. Heater burnout and SSR failure detection are not available when the control output on the heating side is current output. 2. Refer to the List of Models for combinations of functions. E5ZE-8@D1@B-V2...
-
Page 2: Ordering Information
Connector 100 to 240 VAC E5ZD-SDL1 24 VDC Note: Not all the functions of the E5ZE can be set, which should be taken into consideration when designing the system. For de- tails, refer to the E5ZD-SDL Setting Display Unit Datasheet (H061). -
Page 3: Specifications
The total output of all control points (alarm 1 NPN open collector output and alarm 2 NPN open collector output) HB alarm (heater burnout detection): Total output of all control points (1-point NPN open collector output) HS alarm (SSR failure detection):... -
Page 4: Input Ranges
–999 to 9999 C/ F, 0 to 9999 C/ F (upper- and lower-limit alarm) (in units of 1 C/ F) –999.9 to 9999.9 C/ F, 0.0 to 9999.9 C/ F (upper- and lower-limit alarm) (in units of 0.1 C/ F) (see note... -
Page 5: Communications Specifications
Weight With casing:1,700 g max. Note: 1. The measurement accuracy of the E5ZE used with a thermocouple B at 400 C or 750 F max. is not guaranteed. The following measure- ment accuracy values are applied to the E5ZE. K and T at –100 C max. and U: 3 C 1 digit max. -
Page 6: System Configuration
I/O Block G70D-V@O@16 Relay terminal !Caution Be sure to use the above Units, which save wiring effort, and con- nection cables for the prevention of malfunctions or accidents that may be caused by mistakes in wiring. Dimensions Note: All units are in millimeters unless otherwise indicated. - Page 7 The mounting brackets must be attached to the E5ZE with the four M3 6 screws provided with the E5ZE and each of the screws should be tightened to a torque of 0.43 to 0.58 N·m, or 4.4 to 5.9 kgf·cm. Do not mount as shown in the following diagram.
-
Page 8: Warranty And Limitations Of Liability
Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS.