Omron CQM1H - PROGRAM Programming Manual page 493

Host Link Commands
Response Format
Parameters
6-5-31 TEST–– TS
Command Format
Response Format
Parameters
468
An end code of 00 indicates normal completion.
1 0
@ x 10 x 10 M
Node Header
No. code
Model Code
"Model code" indicates the PC model in two digits hexadecimal.
Model code
01 C250
02 C500
03 C120
0E C2000
10 C1000H
11 CQM1H/C2000H/CQM1/CPM1/CPM1A/CPM2A/CPM2C/SRM1
12 C20H/C28H/C40H/C200H/C200HS
20 CV500
21 CV1000
22 CV2000
40 CVM1-CPU01-E
41 CVM1-CPU11-E
42 CVM1-CPU21-E
Returns, unaltered, one block of data transmitted from the host computer.
1 0
@ x 10 x 10 T S
Node No. Header
code
An end code of 00 indicates normal completion.
1 0
@ x 10 x 10 T S
Node No. Header
code
Characters (Command, Response)
For the command, this setting specifies any characters other than the carriage
return (CHR$(13)). For the response, the same characters as specified by the
command will be returned unaltered if the test is successful.
1 0 1 0
M x 16 x 16 x 16 x 16
End code Model
code
Model
122 characters max.
Characters
122 characters max.
Characters
Section 6-5
* ↵
FCS Terminator
↵
*
FCS Terminator
* ↵
FCS Terminator