Omron CQM1H - PROGRAM Programming Manual page 434

Network Instructions
Destination node:
CS1-series PC
Area Code
CIO 00
Timer (see note 1) 03
Counter (see note 2) 04
DM 05
EM Banks 0 to 7 10 to 17
Banks 8 to 15 A8 to AC
Current bank 18
Note
Examples
00000 AR 0209
C: DM 0300
C+1: DM 0301
C+2: DM 0302
C+3: DM 0303
Flags
@SEND(90)
S
D
C
Note Specify the area code according to the following table.
Destination node:
CQM1H, C200HX/HG/HE PC
Area
IR
LR
HR
AR
Timer/Counter
DM
EM Banks 0 to 7
Banks 8 to 15
Current bank
1. Words 0 to 2555 in the IR Area can send and receive data.
2. Timer/counter numbers 0 to 2047 can send and receive data.
When IR 00000 and AR 0209 (the Network Instruction Enabled Flag) are ON
in the following example, the ten words from DM 0100 to DM 0109 are trans-
mitted to node number 3 in the local network where they are written to the ten
words from DM 0200 to DM 0209. The data will be retransmitted up to 3 times
if a response is not received within ten seconds.
15 0
0 0 0 A
C 3 6 4
0 0 0 3
0 0 0 0
ER: Indirectly addressed EM/DM word is non-existent.
(Content of *EM/*DM word is not BCD, or the EM/DM area boundary
has been exceeded.)
The number of send words exceeds 990 words for a Controller Link
Unit.
There is no Controller Link Unit installed.
The source words exceed the data area boundary.
S: Source node beginning send word
D: Destination node beginning receive word
C: Source node first control data word
15 12 11 8 7 6 5 4 3 2 1 0
D
Area code*
0 0 0 0
D+1
Word address (2nd digit)
Word address (3rd digit)
Word address (4th digit)
Destination node:
CV-series PC
Code Area
00 CIO
06 CPU Bus Link
07 Auxiliary
08 Timer
03 Counter
05 DM
10 to 17 EM Banks 0 to 7
28 to 2F Current bank
18
Address Instruction
@SEND(90)
00000
DM 0100
00001
DM 0200
00002
DM 0300
DM 0100
DM 0101
DM 0109
Section 5-29
Word address (5th digit)
Word address (1st digit)
Code
00
01
02
03
04
05
10 to 17
18
Operands
LD 00000
AND AR 0209
SEND(90)
DM 0100
DM 0200
DM 0300
Node 3
DM 0200
DM 0201
DM 0209
409