Cp1W-Cif01 Rs-232C Option Boards - Omron CP1H-CPU - 05-2006 Operation Manual

Part Names and Functions
2-1-2

CP1W-CIF01 RS-232C Option Boards

!Caution Always turn OFF the power supply to the PLC before mounting or removing
46
(17) Connector for CJ Unit Adapter
A maximum total of two CJ-series Special I/O Units or CPU Bus Units
can be connected by mounting a CP1W-EXT01 CJ Unit Adapter to the
side of a CP1H CPU Unit. CJ-series Basic I/O Units, however, cannot be
connected.
SYSMAC
IN
CP1H
L1 L2/N COM 01 03 05
BATTERY
00 02 04
POWER
PERIPHERAL
ERR/ALM
BKUP
MEMORY
00 01
COM COM
100CH
OUT
RS-232C Option Boards can be mounted to Option Board slots 1 or 2 on the
CPU Unit.
When mounting an Option Board, first remove the slot cover. Grasp both of
the cover's up/down lock levers at the same time to unlock the cover, and then
pull the cover out.
Then to mount the Option Board, check the alignment and firmly press it in
until it snaps into place.
an Option Board.
Front
(1) Communications Status Indicator
COMM
(2) RS-232 Connector
CP1W-EXT01
CJ Unit Adapter
07 09 11 01 03 05 07 09 11
06 08 10 00 02 04 06 08 10
EXP
02 03 04 06 00 01 03 04 06
COM COM 05 07 COM 02 COM 05 07
101CH
1CH
A maximum of two CJ-series Special I/O
Units or CPU Bus Units can be connected
Back
Section 2-1
CJ1W-TER01
CJ-series End Cover
(Included with CJ Unit Adapter)
DIN Track
(3) CPU Unit Connector