Background Execution Settings - Omron CP1H-CPU - 05-2006 Operation Manual

PLC Setup
Settings: CPU Unit Settings
Execute Process Settings
Name
1 Do not detect Low Bat-
tery (run without battery)
2 Detect Interrupt Task
Error
3 Stop CPU on Instruction
Error
4 Don't resister FAL to
error log

Background Execution Settings

Name
1 Table data process
instructions
2 String data process
instructions
3 Data shift process
instructions
4 Com Port number (logi-
cal number)
Comms Instructions Settings in FB:
Settings for Communications Instructions in Function Blocks
Name
1 Retry Counts:
Number of retries
2 Response Timeout
(default 2s), Comms
Instructions in FB
3 Response Timeout
(default 2s), DeviceNet
Comms Instruction in FB
600
Default Settings
Detect. Detect
Do not detect.
Detect. Detect
Do not detect.
Do not stop. Do not stop.
Stop
Register. Register.
Do not register.
Default Settings
Do not execute Do not execute in back-
in background. ground. Execute in back-
ground.
Do not execute Do not execute in back-
in background. ground. Execute in back-
ground.
Do not execute Do not execute in back-
in background. ground. Execute in back-
ground.
Port 00 0: Port 0
:
7: Port 7
Default Settings
0 0 to 15
2 s 2 s
1: 1 0.1 s
:
65535: 65,535
2 s 2 s
1: 1 0.1 s
:
65535: 65,535
When setting is read
by CPU Unit
Every cycle
Every cycle
At start of operation
Every cycle
When setting is read
by CPU Unit
At start of operation
At start of operation
At start of operation
At start of operation
When setting is read
by CPU Unit
At start of operation
At start of operation
0.1 s
At start of operation
0.1 s
Appendix G
Internal Bits Settings
address
128 15 0
1
128 14 0
1
197 15 0
1
129 15 0
1
Internal Bits Settings
address
198 15 0
1
198 14 0
1
198 13 0
1
198 00 to 0 hex
03 :
7 hex
Internal Bits Settings
address
200 00 to 0 hex
03 :
F hex
201 00 to 0000 hex
15
0001 hex
:
FFFF hex
202 00 to 0000 hex
15
0001 hex
:
FFFF hex