Part Names and Functions
!Caution Always turn OFF the power supply to the PLC before mounting or removing
(11) Power Supply, Ground, and Input Terminal Block
Power supply ter-
minals
Ground terminals
Input terminals
(12) Option Board Slots
The following Option Boards can be mounted in either slot 1 or slot 2.
• CP1W-CIF01 RS-232C Option Board
• CP1W-CIF11 RS-422A/485 Option Board
an Option Board.
(13) Input Indicators
The input indicators light when input terminal contacts turn ON.
(14) Expansion I/O Unit Connector
A maximum of seven CPM1A Expansion I/O Units (40 I/O points, 20 I/O
points, 8 input points, 8 or output points) and Expansion Units (Analog I/
O Units, Temperature Sensor Units, CompoBus/S I/O Link Units, or
DeviceNet I/O Link Units) can be connected. (For details on using
Expansion Units and Expansion I/O Units, refer to SECTION 7 Using
CPM1A Expansion Units and Expansion I/O Units.)
(15) Output Indicators
The output indicators light when output terminal contacts turn ON.
(16) External Power Supply and Output Terminal Block
External power
supply terminals
Output terminals
Used to provide a 100- to 240-VAC or 24-VDC power
supply.
Functional ground (
):
Connect this ground to strengthen noise immunity and to
prevent electric shock.
(AC power supply models only.)
Protective ground (
):
To prevent electric shock, ground to 100
Used to connect input devices.
XA and X CPU Units with AC power supply specifications
have external 24-VDC, 300-mA max., power supply ter-
minals. They can be used as service power supplies for
input devices.
Used for connecting output devices.
Section 2-1
or less.
45