TCD Analyzer
If user wants to move to the next screen during the warmup time,
click the 'skip' option. If no key is pressed for 10 seconds, the system
will automatically invoke the self-test and present the Diagnostics
screen.
4.2.1 Diagnostic Screen
Clicking on Self-Test (or not pressing any other button for 10
seconds) will start the internal diagnostic self-test routine. It will update
the status [PASS/FAIL] on this screen as it proceeds. The Self-Test
routine includes the following processes.
Power supply section testing
Analog output section testing
Pre-amp testing
As testing completes and results are reported, the list will extend
beyond the bottom screen limit and a scroll bar will appear on the right.
Use the scroll bar to view the additional test results.
Teledyne Analytical Instruments
Figure 4-2: Warmup Finished
Operation
29