Compaq Deskpro 2000 Series Reference Manual page 91

CAUTION: Static electricity can damage the electronic
components of the computer or optional equipment. Before
beginning these procedures, ensure that you are discharged of
static electricity by briefly touching a grounded metal object. Refer
to Appendix G for more information.
Six Memory Module Sockets on the Pentium Pro-Based System Board
Model
Pentium–based system
Pentium Pro–based system
CAUTION:
When handling a memory module, be careful not to
touch any of the contacts. Doing so may damage the module
To install a memory module, complete the following steps:
1. Remove the computer cover as described in the section
"Removing the Computer Cover."
2. Insert a memory module at a 45-degree angle into a
memory socket on the system board.
A memory module can be installed in only one way. Match
the notch on the module with the tab on the memory
socket. Push the module down into the socket, ensuring
that the module is fully inserted and properly seated.
Memory Upgrades
Standard
8-, 16-, or 32-MB
DRAM
16- or 32-MB DRAM
Expandable to:
128-MB DRAM
192-MB DRAM
-15
Reference Guide 5