Installing A Pci Or An Isa Expansion Board - Compaq Deskpro AP500 Reference Manual
Hp deskpro ap500: reference guide
Hide thumbs
Also See for Deskpro AP500:
- Maintenance and service manual (9 pages) ,
- Supplementary manual (21 pages)
Table of Contents
Advertisement
9-4
Expansion Boards
Installing a PCI or an ISA
Expansion Board
To install a PCI or ISA expansion board:
1.
Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2.
Remove the side access panel.
3.
Remove the expansion board assembly from the workstation chassis.
4.
Refer to the following illustration to remove an expansion slot cover.
Figure 9-2. Removing the screw and expansion slot cover
To replace an expansion slot cover, reverse the above procedure.
Writer: Jeff Parmenter Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
File Name: J-CH09.DOC Last Saved On: 12/16/98 11:29 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Advertisement
Table of Contents
Troubleshooting
