Completing The Installation - Compaq Deskpro 2000 Series Reference Manual

Completing the Installation

-28
5 Upgrading the Desktop Computer
1. Connect the hard drive signal and power cables.
Connecting the Signal and Power Cables
2. Change the jumper settings if indicated in the
documentation supplied with the new hard drive.
If you change the drive configuration or add an additional
hard drive, you may need to change the jumper settings.
For more information on changing the jumper settings, see
the documentation supplied with the new hard drive. By
setting the jumpers on the drives, you are determining
which drive is the primary drive and which is the
secondary drive.
If your new drive includes the cable select feature, no
jumper setting changes are required. Refer to the
documentation supplied with the cable for instructions on
using the cable select feature. If you install a third-party
hard drive, you will need to purchase a jumper cable. For a
nominal fee, you can purchase a jumper cable (part number
112528-2) from Compaq Computer Corporation.
3. Replace the computer cover.