Table of Contents
Advertisement
Installing an Expansion
Board
1. Complete the steps in the "Opening Your Computer" section of
this chapter.
2. Slide the expansion board into the expansion slot, and press it into
place firmly, as shown in the following figure.
✎
Press firmly on the board to seat the whole connector in the
expansion board slot properly.
3. Replace the screw at the side of the expansion slot.
4. Complete the steps in the "Reassembling the Computer" section
of this chapter.
5. Connect the external cables to the installed board, if necessary.
Installing an Expansion Board
User's Guide 4–7
Advertisement
Table of Contents
