Compaq Deskpro 2000 Series Reference Manual page 125

5. Replace the graphics controller board in the same
expansion slot.
6. Replace the brace holding the expansion board back into
the minitower.
7. Replace the computer cover.
8. Turn on the computer and start the Windows program.
9. Select the Display icon in the Compaq Utilities group box
in Windows 3.1, or the Display icon in the Control Panel in
Windows 95 or Windows NT 4.0, to take advantage of the
additional display modes now available with the upgraded
memory. Follow the instructions on the screen.
10. Test the system (optional) using the Computer Checkup
(TEST) utility. Refer to Chapter 3, "Using Compaq
Utilities."
-19
Reference Guide 6