Upgrading The Processor; Installing A Processor Upgrade - Compaq Deskpro 2000 Series Reference Manual

Upgrading the
Processor

Installing a Processor Upgrade

-12
6 Upgrading the Minitower Computer
Depending on the model, you can upgrade the processor by
replacing the processor currently installed with a processor
upgrade.
Processor Supported Upgrades
Compaq Deskpro 2000 Pentium Models
Processor Upgrade:
Pentium 133 Mhz
Pentium 150 Mhz
Pentium 166 Mhz
Pentium 200 Mhz
Compaq Deskpro 2000 Pentium Pro Models
All Pentium Pros or Overdrive Processors
CAUTION:
Installing the processor upgrade incorrectly may cause
damage to the processor board. Compaq recommends that you
have a Compaq authorized reseller or service provider install the
processor upgrade. If you plan to install it yourself, read all the
instructions carefully before you begin.
To replace the installed processor with a processor upgrade,
complete the following steps:
1. Remove the computer cover as described in the section
"Removing the Computer Cover."
WARNING: To reduce the risk of personal injury from hot
!
surfaces, allow the internal system components to cool before
touching.
CAUTION:
When replacing a Pentium processor, you must release
the heatsink retaining clip before you pull the ZIF socket handle.
This clip engages the processor socket to hold the heatsink in
place.