Compaq Deskpro 2000 Series Reference Manual page 192

R—
real-time clock, 1-7
reconfigure the computer, when to, 3-1
reconfiguring
Windows 3.1, 5-2, 5-3, 6-2, 6-3
Windows 95, 5-2, 6-2
Windows NT 4.0, 5-2, 6-3
reconfiguring the computer, 5-2, 5-3,
6-2
RemotePaq, 3-8
removing the computer cover, 5-3, 6-4
repairing Windows NT, 3-20
restoring Windows NT 4.0, 3-19
restoring your hard drive
Windows 95, 3-17
Windows NT 4.0, 3-20
riser card brace, 5-5
ROMPaq diskette, 2-10
—S—
security features
cable lock provision, 2-2
disable diskette drive, 2-7
disable diskette drive boot ability,
2-7
disable diskette drive write, 2-7
disable parallel port, 2-7
disable serial port, 2-7
diskette boot control, 2-1
diskette drive control, 2-1
diskette write control, 2-2
Flash ROM write protect, 2-2
hard drive control, 2-2
parallel interface control, 2-2
passwords, 2-4
power-on password, 2-1
changing, 2-5
clearing, 2-6
deleting, 2-6
entering, 2-5
QuickLock/QuickBlank, 2-1, 2-7,
2-8
enabling, 2-8
I-6
Index
serial interface control, 2-2
setup password, 2-1
Security Management, 3-5, 3-23
serial connector, 1-2, 1-12
serial interface
connector pin assignments, D-3
serial interface control, 2-2
serial port, disabling the, 2-7
setup password, 2-1
SIMMs. See single inline memory
modules
single inline memory modules, 5-14,
6-14
software, 1-8
software, using CD-ROM, 4-5
solving minor problems, 7-2
speaker, 1-3, 1-8
specifications
CD-ROM Drives, B-5
computer weight, B-1
diskette drive, B-2
Graphics controllers, B-6
hard drives, B-3, B-4
keyboard, B-2
power supply, B-1
system
BIOS, 1-5
I/O, 1-5
memory, 1-3
security, 1-7
system board illustration, 5-4, 5-5, 6-6,
6-7
system board jumpers
configuration memory (CMOS),
E-2
power-on password, E-2
system configuration, 5-3, 6-3