Electrostatic Discharge - Compaq Deskpro 2000 Series Reference Manual

Grounding Methods
-2
G

Electrostatic Discharge

There are several methods for grounding. Use one or more of
the following methods when handling or installing electrostatic-
sensitive parts:
Use a wrist strap connected by a ground cord to a grounded
workstation or computer chassis. Wrist straps are flexible
straps with a minimum of 1 Mohm +/- 10 percent resistance
in the ground cords. To provide proper ground, wear the
strap snug against the skin.
Use heelstraps, toestraps, or bootstraps at standing
workstations. Wear the straps on both feet when standing on
conductive floors or dissipating floor mats.
Use conductive field service tools.
Use a portable field service kit with a folding static-
dissipating work mat.
If you do not have any of the suggested equipment for proper
grounding, contact an Compaq authorized reseller or service
provider.
For more information on static electricity, contact your Compaq
authorized dealer, reseller, or service provider.