Compaq Deskpro 2000 Series Reference Manual page 89

3. Remove the heatsink retaining clip
4. Lift the heatsink
5. Release the original processor from the socket by pulling
6. Lift the processor
Removing the Processor
The handle on the ZIF socket in your computer may not look
identical to the handle shown in the drawing. All handle types
perform the same function.
7. Align the new processor so that the single pin on the inside
8. Install the processor by lowering it into the ZIF socket.
9. Push the handle on the ZIF socket back into place to secure
10. Install the heatsink and the heatsink retaining clip.
11. Replace the computer cover.
the clip's extended tab until it releases from the safety
catch.
2 off the processor.
the handle on the ZIF socket out
out of the socket.
5
corner of the processor aligns with the single pinhole on
the inside corner of the socket.
the processor.
1 by pressing down on
3 and upward 4 .
Reference Guide
-13
5