If You Are Using Windows 95; If You Are Using Windows Nt 4.0; Customizing The Display; Power Management - Compaq Deskpro 2000 Series Reference Manual

If you are using Windows 95

If you are using Windows NT 4.0

Customizing the
Display

Power Management

-12
3 Using Compaq Utilities
1. Click Start, then click Settings.
2. Click Control Panel, then double-click the Display icon.
3. Click the Settings tab.
4. Click the Change Display Type button.
5. Choose Monitor Type and click the Change button.
6. Click the Have Disk button.
7. Insert the manufacturer's installation disk into drive A and
click the OK button.
To display driver information, click the Compaq tab.
1. Click Start, then click Settings.
2. Click Control Panel, then double-click the Display icon.
3. Click the Compaq tab.
4. Click the Settings button.
5. Click on the manufacturer of the monitor.
6. Click on the model of the monitor.
7. Click OK and restart the computer for changes to take
effect.
Although the setup utility automatically selects the display
configuration, you can manually change the graphics resolution
of the controller to match a specific software program or suit
your personal preferences.
Use Computer Setup, accessible through the Compaq Utilities
menu, to establish, modify, or disable the Power Management
features of the computer. You should first disable the monitor
timeouts in Computer Setup, then establish the settings in
Windows 95 and Windows NT 4.0, to avoid potential conflicts.
If you are using Windows 95 or Windows NT 4.0, you can
establish, modify, or disable Power Management settings for the
monitor using Display Properties. To access Display Properties,
right click on the Windows Desktop, then choose Properties.