Installing A Pci Or Isa Board - Compaq Deskpro 2000 Series Reference Manual

Installing a PCI or
ISA Board
To install a PCI or an ISA expansion board, complete the
following steps:
1. Locate the correct vacant slot on the expansion board.
If you are installing an expansion card on the side of the
expansion riser board that has three expansion slots, skip this
section and go to step 5.
2. If you are installing an expansion card on the expansion
riser board side with two expansion slots (closest to the
power supply), first remove the retaining screw and the
retainer bracket 1
2 .
Removing the Retaining Screw, Retainer Bracket, and Slot Cover
, then remove the expansion slot cover
-7
Reference Guide 5