Removing The Computer Cover - Compaq Deskpro 2000 Series Reference Manual

Removing the
Computer Cover
Loosening the Thumbscrews
-4
6 Upgrading the Minitower Computer
To install optional equipment, you must remove the computer
cover to gain access to the drive bays or expansion slots you
want to use.
CAUTION:
Before removing the computer cover, ensure that the
computer is turned off and that the power cord is disconnected
from the electrical outlet.
To remove the computer cover, complete the following steps:
1. Turn off the computer and any external devices.
2. Disconnect the power cord from the power outlet and any
external devices from the computer.
3. Facing the back of the computer, loosen the three
thumbscrews on the rear panel of the minitower computer
and remove them. Use a coin to loosen them if they're too
tight to loosen by hand.