Compaq Deskpro 2000 Series Reference Manual page 88

2. Remove the two screws from the diskette drive and move
the diskette drive back until it rests on the power supply.
Removing the Two Screws and the Diskette Drive
WARNING:
To reduce the risk of personal injury from hot
!
surfaces, allow the internal system components to cool before
touching.
CAUTION:
When replacing a Pentium processor, you must
release the heatsink retaining clip prior to pulling the ZIF socket
handle. This clip engages the processor socket to hold the heatsink
in place.
-12
5 Upgrading the Desktop Computer