Opening the Tray Manually
-4
4
Using The 8X CD-Rom
By following the instructions below, you can operate the
emergency eject button manually to remove a disc from the tray
if the tray will not open.
Certain applications or operating system software may disable
the eject button to prevent accidental damage to the disc. If the
eject button is disabled by the application software, it will not
operate. Exit the application and again press the eject button to
remove the disc. If the tray still doesn't open, follow the
procedures below.
CAUTION:
Before beginning this procedure, turn off the power to
your computer.
1. Insert a metal rod into the emergency eject hole and push
firmly.
You may use a straightened paper clip to open the
CD-ROM tray manually.
Opening the CD-ROM Tray Manually