Honda VFR800F 2014 Service Manual page 414

LIGHTS/METERS/SWITCH
ES
SWTCH
LINE OPEN CIRCUIT INSPECTION
Turn the
ignition switch OFF.
Disconnect the following connectors;
-
grip
heater
contro[er 10p
(Btack) (page
20_30)
-
heater switch
4p
(Btack) (page
Zb_SZ)
Qleck for
continuity between
the
heater switch 4p
(Plr"l.) connector
[1] and grip heater contiotter
tOp
(utacK) connector [2] terminals of the wire harness side.
CONNECTTON:
Gray
-
Gray
There
should
be continuity.
lf there is
no continuity,
check for an open circuit
in the
Gray wire.
INDICATOR CIRCUIT INSPECTION
G9MB|NATION
METER INDTCATOR LINE
INSPEGTION
Turn
the
ignition switch OFF.
Disconnect the following connectors:
-
grip
heater controller 10p
(Black) (page 20-30)
-
combination meter
20p (Gray) (page 2O-t
t)
Check for
continuity between the grip heater controller
10P (Black) connector [1] and combination meter 20p
(Gray) connector
[2]
terminals of the wire
harness side.
CONNECTION:
Yellodviolet
-
yellodviolet
There should be continuity.
lf
there is
no continuity, check
for an open circuit
in the
Yellodviolet
wire.
SWITGH INDICATOR LINE
INSPECTION
Turn the ignition switch OFF.
Disconnect the following connectors:
- grip
heater
controller
10P (Black) (page 20-30)
-
heater switch 4P (Black) (page 20-32)
Check
for
continuity between the heater switch 4p
(Black) connector [1] and grip
heater controller
10P
(Black) connector
[2]
terminals of the wire
harness side.
CONNECTION: Blue -
Blue
There should be continuity.
lf
there is
no continuity, check for
an
open circuit
in the
Blue wire.
\:l
20-34