Honda VFR800F 2014 Service Manual page 390

LIG HTS/M
ETERS/SWITCH
ES
FRONT TURN SIGNAL/POSITION
LIGHT
TURN SIGNAL LIGHT BULB
REMOVAL/INSTALLATION
Remove the screw
[1] and turn
the
rearview mirror
[2].
Carefully release the
boss and
tabs
in
the
sequence as
shown and remove the mirror cover
[3].
Remove the bulb socket [1] from the light
housing
by
turning
it
counterclockwise.
While
pushing
the
bulb [2] in,
turn
it counterclockwise to
remove
it.
lnstallation is
in
the reverse order of removal.
NOTE:
.
Only use amber bulbs.
DISASSEMBLY/ASSEMBLY
Remove
the
rearview mirror (page 2-8).
Remove the following:
-
mirror cover and bulb socket [1] (page 20-6)
(when turning the
rearview mirror,
set
it
into
the
upper cowl)
-
wire [2] (out of
the mirror assembly)
-
three tapping screws
[3]
-
position light assembly
[4]
-
two tapping screws and
washers
[5]
-
turn signal/position light lens
[6]
lnstallation
is in the reverse order of removal.
NOTE:
.
When installing the
lens, be careful not
to
dislodge
the grommets
in
the
lens housing.
t6l t3l
20-6