Honda VFR800F 2014 Service Manual page 146

FUEL SYSTEM
Do not snap the
throttle valve. lt
may
cause incorrect idle
operation.
Release
the throttle stop screw [1] from
the clips
[2]
securing with the clutch hose.
Disconnect the
water hose
[3].
Loosen the
insulator band screws (throttle body
side)
using a long phillips screwdriver
[1].
Remove the
throttle
body
[2]
from
the
insulators.
NOTICE
Do
not
hotd
the fuel rail
on the
throttle
body
while
removing the throttle
bodY.
Remove
the socket bolt [1] and remove
the
throttle
drum cover
[2] by
releasing
the tab [3] from
the
connecting plate.
Remove
the two socket bolts [4]
to remove
the
cable
holder [5] and disconnect the throttle cables
[6]
from the
throttle drum.
Loosen
the band screws [1] and remove
the
insulators
[2] if necessary.
Seal
the intake porls with tape or clean shop towels to
keep dirl
and debris from entering the engine.
7
-15