Honda VFR800F 2014 Service Manual page 127

ELECTRIC STARTER
STARTER RELAY SWITCH
OPERATION INSPECTION
Remove
the
battery cover (page
2_3).
Shift the transmission
into neutral or squeeze the clutch
lever with the
sidestand
retracted.
Turn the
ignition
switch
ON with the
engine
stop
switch
turned
"O". Push
the
starter switch.
The
coil is normal
if the starler
relay switch
[1] clicks.
lf
you don't hear the starter relay switch
,'CLICK,,,
inspect
the
relay coil circuits.
RELAY COIL CIRCUIT INSPECTION
Remove the switch cover [1] pushing the two
tabs
[2].
Disconnect
the
starter relay switch 4p
(Black)
connector
[1].
POWER INPUT LINE
C_heck
for continuity
between ihe wire harness
side 4p
(Black) connector
[1]
terminals.
CONNECTION:
Red -
yelloWred
There should
be
continuity when the
starter switch
is
pu:hgq. with
the
ignition switch
ON and the
engine stop
switch
"O".
GROUND LINE
C_heck
for continuity
between
the wire harness side 4p
(tslack) connector terminal and ground.
CONNECTION; Green/red
- Ground
Gear position
switch
line:
There should be continuity when the transmission is
in
neutral with the
ignition switch ON (there
is a
slight
resistance due to the diode.
Clutch/sidestand
switch
Iine:
There should be
continuity
when
the
clutch lever
is
squeezed
with the sidestand retracted (there
is a
slight
resistance due to
the
diode).
6-g