Honda VFR800F 2014 Service Manual page 383

BATTERY/CHARGING SYSTEM
ALTERNATOR CHARGING COIL
INSPECTION
Remove the right middle cowl (page 2-6).
Disconnect
the alternator 3P (Gray) connector
[1] from
the
regulator/rectifi er.
Check
the
connector
for
loose contacts
or
corroded
terminals.
Measure
the
resistance between
the
Yellow
wire
terminals of the alternator side 3P (Gray) connector.
STANDARD:
0.1
-
0.5
O
(20'C/68'F)
Check for continuity
between
each wire terminal of
the
alternator side 3P (Gray) connector and ground.
There should be no continuity.
Replace
the alternator stator if the resistance is out of
specification, or
if
any
wire has continuity to ground.
For alternator stator replacement
(page
12-21).
ll
AC
type
shown:
t1l
19-1
1