Fan Unit Removal Procedure - Mitsubishi Electric MELSERVO MR-J5 Series User Manual

Ac servo system

Hide thumbs Also See for MELSERVO MR-J5 Series:

Table of Contents

Fan unit removal procedure

The following illustrates an example where the MR-J5-FAN1 is removed from the MR-J5-70G. The number of screws for

mounting differs depending on the fan unit.

Remove the screws that fixed the fan unit. Keep the removed screws for installation of the new fan unit.

Pull up the cover of the fan unit using a precision screwdriver.

Pull out the fan unit vertically.

2 INSTALLATION

2.5 Fan unit replacement procedure