Sscnet Iii Cable Connection [B] - Mitsubishi Electric MELSERVO MR-J5 Series User Manual

3.8

SSCNET III cable connection [B]

Do not look directly at the light emitted from the CN1A and CN1B connectors of the servo amplifier or the end
of the SSCNET III cable. The light may cause discomfort when it enters your eyes.
SSCNET III cable connection
Connect the SSCNET III cable connected to the controller or the preceding servo amplifier to the CN1A connector. Connect
the SSCNET III cable connected to the succeeding servo amplifier to the CN1B connector. Put the cap that came with the
servo amplifier on the CN1B connector of the final axis servo amplifier.
SSCNET III cable
Controller
The first axis servo amplifier The second axis servo amplifier
SSCNET III cable
CN1A
CN1B
The last axis servo amplifier
SSCNET III cable
CN1A
CN1B
3 SIGNALS AND WIRING
3.8 SSCNET III cable connection [B]
3
CN1A
CN1B
Cap
141