Program Stitches and Letters
To program the stitch combination shown:
• Touch "FUNC" to bring up
• Insert Stitch d-Card E
1
• Touch stitch E
15. It appears on the Touch Screen
1
The cursor moves automatically to the next po si tion
ready to receive the next stitch, or to adjust the one
just entered.
Eject Stitch d-Card E
and insert Stitch d-Card O
1
To program "Q" in upper case letters, touch "Q" on
Stitch d-Card O
. "Q" appears on the screen next to
1
the stitch.
To program "uilt" in lower case letters, touch in the
lower right corner of the Stitch d-Card. The low er
case submenu is activated (
Touch Screen).
Touch u, the letter appears on the display and the
cursor moves to the next position. Continue to enter
the letters: i, l, and t.
Eject Stitch d-Card O
and insert Stitch d-Card E
1
Touch stitch E
15. It appears on the Touch Screen.
1
• Touch
to mirror image the stitch end to end.
Touch the
function button on the machine
to enter stop to sew only one sequence of your
program.
Touch
function button to add a cut in your
sequence to make your Quilt Designer II cut the
thread when it has fi nished sewing.
,
, Block alphabet.
1
is vis i ble on the
.
1
Decorative Sewing
65