Removing The Bobbin Case; Bobbin Winding - Husqvarna ZIGZAG 1030 Operating Manual

Removing the bobbin case
ILif
or
remove thle
e.xtension
plate:, open th!e shuttle
()
ailitate the opening of the shuttle door.
I
Crasp
the bobbin case with the thumb and index
figer so) that the latch is depressed and draw out
the bobbin case. The bobbin will remain in the
case as long as the latch is depressed. When
you
release the catch, the bobbin will be released.
Bobbin windingN
On one side of the bobbin there is a hole. Turn the
bobbin vi th the hiole outwards and slide the bobbin
I
onto
the bobbin
spindle
which is located on the: right
side of the machine. Place the
thread ov•er the.'
\
bo)bbin. Start from above and wind the thread a few\
Iimes
a round thle bobbhin. Hold the end of the thread
while you pres,s down I the foot colntrol. Release the
\
thread end as soon as winding starts. Stop winding
Ibefore
the bobbin is completely, filled
about 1 /32
\
(1 rm)
from the ri
i
(outer edgc).