Add Pre-Set Annotation; Edit Pre-Set Annotation - GE Definium 5000 Operator's Manual

Figure 10-18 Pre-set Annotation editing
4. To change the order of the list, select the annotation.
5. Press the [ ] or [ ] button to move the item up or down the list.
6. Continue with

Add Pre-set Annotation

Annotation (p. 10-28).
7. When finished, press [SAVE] to retain your changes.
8. Press [CLOSE].
Add Pre-set Annotation
1. From the Pre-set Annotations screen, press [ADD].
2. Enter the text of the annotation.
3. Press [ADD].

Edit Pre-set Annotation

1. From the Pre-set Annotations screen, select the annotation.
2. Press [EDIT].
3. Edit the text of the annotation.
Definium 5000 X-Ray System
Operator Manual
(p. 10-27), Edit Pre-set Annotation
5197809-1EN Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 10: Set Preferences
(p. 10-27), or Remove Pre-set
10-27