GE Definium 5000 Operator's Manual page 82

Function
Performing Identifies the Radiologist or performing physician. You can use the drop-down list to
Physician select commonly used names, or type the name into the drop-down list box.
Refer to
adding names to the drop-down list.
Referring Identifies the referring physician. You can use the drop-down list to select
Physician commonly used names, or type the name into the drop-down list box.
Refer to
adding names to the drop-down list.
Status Displays the status of the selected exam.
When adding a patient, the only option is "Scheduled".
Patient Information options are:
• Scheduled - The procedure has been added to the Worklist, but the exam has not
started.
• Suspended - An exam was started but interrupted before completion. The exam
may be resumed at a later time.
• Complete - The exam is one that has been "Closed" on the Acquisition screen or
marked as "Complete" on the Patient Information screen. Completed exams are
sent to the PACS (where available).
• Discontinued - The procedure was opened, but no exposures were taken. The
exam may be started at a later time or the procedure deleted.
• In progress - The exam is currently in progress.
Study ID (RAD Displays the procedure ID number.
#)
Exam Date Sets the scheduled date of the selected exam. By default, the current date is
automatically inserted. You may change this date as necessary.
Exam Time Sets the time for the patient's exam to be performed. By default, the time when the
[ADD PATIENT] button was clicked is automatically inserted. You may change this
time as necessary.
Modality Displays the modality of the exam. The abbreviation for x-ray is DX.
Comments Provides a space for any notes or information not listed in any other field.
[START EXAM] Displays the Select Protocol screen in preparation for making exposures. Refer to
Chapter 6: Image Acquisition-Select or Change Protocols
information.This also adds the patient name to the Worklist.
NOTE: This button does not appear if the Patient Information screen is opened from
Definium 5000 X-Ray System
Operator Manual
Chapter 10: Set Preferences-Preset Names
Chapter 10: Set Preferences-Preset Names
the Image Viewer or Image Management screens.
5197809-1EN
© 2008 General Electric Company. All rights reserved.
Description
(p. 10-15) for information on
(p. 10-15) for information on
Rev. 4 (13 February 2008)
Chapter 5: Worklist
(p. 6-10) for more
5-17