GE Definium 5000 Operator's Manual page 35

DANGER: Clear all people and objects away from the swivel arm before attempting any movement.
Table 3-4 Controls and their functions
Symbol
Move
Safety Lock
Low / high speed
Single button (on receptor
and remote control)
Two buttons (on CRIB and
touch screen console)
Move swivel arm vertically
Definium 5000 X-Ray System
Operator Manual
Begins movement to a position selected from the touch screen
console. Press and hold the button until the position is reached.
Movement stops if the button is released before reaching the selected
position. Press and hold the button to continue.
Press the Safety Lock button before the attempting movement, if the
Safety Lock is engaged.
If system movement remains continuously blocked (the system Safety
Lock is activated), press and hold the "Move" button and then press the
movement button.
Refer to Position System from Touch Screen Console
information.
Locks or unlocks system movement.
Press the Safety Lock button to unlock the system before the
attempting movement.
Switches between low and high speed.
The default is to move at high speed.
• From the image receptor or remote control, press the button to
move at low speed. Press again to return to high speed.
• From the CRIB, press the button with the single arrow to use slow
speed. Press the button with the double arrow to return to high
speed.
• From the touch screen console, press the button to move at low
speed. Press again to return to high speed.
NOTE: Low/high speed selection does not affect automatic positioning.
Moves the swivel arm vertically.
Press and hold a button until the desired position is reached. Release
the button to stop movement.
5197809-1EN Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 3: System Overview
Description
(p. 3-11) for more
3-9