Table of Contents
Advertisement
10. Select the Laterality:
The selected anatomy determines which laterality options are available.
– If the anatomy is unpaired, then Unpaired is the only available selection.
– If the anatomy is paired, the available sections are: Both, Left, and Right.
– Paired anatomy enables the Patient Side control on the Image Acquisition screen. Refer to
Chapter 6: Image Acquisition
11. Select the Default Position:
The selected anatomy determines which positions are available. In general:
– If the anatomy is unpaired, the selections are Head Down or Head Up
– If the anatomy is paired, the selections are Digits to Back, Digits to Feet, Digits to Front, Digits to
Head.
12. Press [NEXT].
The Add View (or Edit View) screen (2 of 2) appears.
13. Select all Patient Sizes you want available for the view. The default size will automatically be selected.
14. Select Receptors and Modes for each selected receptor.
15. Select the Default Receptor - cassette or GE Digital Detector.
Definium 5000 X-Ray System
Operator Manual
for more information.
5197809-1EN
Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 10: Set Preferences
10-47
Advertisement
Table of Contents
