GE Definium 5000 Operator's Manual page 166

Figure 10-10 Worklist Default Query screen
Table 10-6 Worklist Default Query description
Function
Show list for
Include
Date Range
Plus previous
__ Days __ Hours
Plus future
__ Days __ Hours
Definium 5000 X-Ray System
Operator Manual
Determines Worklist items by system or modality.
• This system – exams for this unit only
• All systems in modality – exams for all digital x-ray
• All systems – exams for all modalities
Allows you to include or exclude completed or discontinued exams on the
Worklist.
Selects the date range of scheduled procedures to show on the Worklist.
Available options are:
• All
• Current Day
Shows procedures that are scheduled for the specified time before the
selected date range.
NOTE: If the "Days" value is left blank, the worklist query will be based on
current time plus the number of hours entered.
Shows procedures that are scheduled for the specified time after the
selected date range.
NOTE: If the "Days" value is left blank, the worklist query will be based on
current time minus the number of hours entered.
5197809-1EN
© 2008 General Electric Company. All rights reserved.
Chapter 10: Set Preferences
Description
Rev. 4 (13 February 2008)
10-14