Add Or Edit Network Host - GE Definium 5000 Operator's Manual

Figure 10-2 Network Connections screen

Add or Edit Network Host

Adding and editing network hosts use very similar process and the same screens as shown in Figure 10-
3 and Figure 10-4. Table 10-1 and Table 10-2 describe the fields in detail.
• If editing an existing connection, select the network host and press [EDIT].
• If adding a new connection, press [ADD].
1. Complete requested information for both tabs (see Table 10-1 and Table 10-2) and press [SAVE] to
add the network host or save the changes.
Definium 5000 X-Ray System
Operator Manual
5197809-1EN Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 10: Set Preferences
10-3