Table of Contents
Advertisement
Tool
Full
Partial
None
Custom
Manual
Shutter
Definium 5000 X-Ray System
Operator Manual
Places all available system annotation on the image.
• Patient information (top left corner) exam date and patient
identification
• Study information (top left corner) exam identification
• Series information (top left corner) series identification
• Image information (top left corner) image identification
• Acquisition information (top right corner) dose
• Hospital information (top right corner) the name of the facility where
the image was acquired
• X-ray parameters (top right corner) the mA, kVp, ms, mAs, and DEI of
the exposure
• Anatomy information (bottom left corner) the protocol used to acquire
the image
• Processing information (bottom left corner) the look used to process
the image
• User measurements (bottom right corner) size and angle
measurements for line, ellipse, and Cobb annotations
Display parameters (bottom right corner) the size of the image and the
zoom
Displays ONLY the facility name, dose information and technical factors.
Removes all system annotations from the image. System annotations can
be re-applied by pressing [FULL], [PARTIAL], or [CUSTOM].
Brings up a screen (Figure 8-7) that allows you to choose which system
annotations appear. Refer to
Manually adjusts the image shutter.
In some cases, the FOV detected by the system does not match the
actual exposed FOV. Use the Manual Shutter tool to correct this.
NOTE: This function is only available when the image is open in a live exam
or for re-processed images.
Refer to
Adjust Image Shutter (Crop Image)
5197809-1EN
© 2008 General Electric Company. All rights reserved.
Description
Customize System Annotations
(p. 8-15) for more information.
Rev. 4 (13 February 2008)
Chapter 8: Image Viewer
(p. 8-12).
8-11
Advertisement
Table of Contents
