Function
Port Number
Pixel Depth
Printer Pixel Size
(micron)
Configuration
Information
Density
Magnification Type
Smooth Factor
Trim
Polarity
Border Density
Empty Image
Density
Printer Memory Size
Definium 5000 X-Ray System
Operator Manual
The port number of the printer.
The resolution of the printer.
Designates the pixel size the printer uses. This is specified by the printer
manufacturer.
A place for you to add notes about the printer or configuration.
Sets the minimum and maximum density range.
Available options are:
• Replicate
• Bilinear
• Cubic
• None
Sets the image smoothing factor.
Designates if there is to be trim or not.
Available options are:
• Normal
• Reverse
Sets the color of the image border.
Available options are:
• Black
• White
Sets the color of areas that have no image printed.
Available options are:
• Black
• White
Designates the memory size of the printer. This is specified by the printer
manufacturer.
5197809-1EN
© 2008 General Electric Company. All rights reserved.
Chapter 10: Set Preferences
Description
Rev. 4 (13 February 2008)
10-9